青云翻译

Spindle arm cylinder control of the central magnetic switch solenoid valve used to control the feed to 2-3 cm away from the workpiece into the blade to prevent cylinder to slow the impact of the workpiece when cutting large circular magnetic switch to the cylinder can be head adjustment, when cuttin

Tool axis swing arm magnetic switch control of the Central cylinder, solenoid valve, used to control entry to 2-3 cm from the workpiece cylinder into a slow approach to prevent shocks when the workpiece, when cutting large magnetic switch to the cylinder head can be adjusted, more hours when cutting

The cutter bar suspends middle the arm air cylinder the magnetic switch to control this solenoid valve, uses in controlling the feed to leave the work piece 2-3 centimeter time air cylinder to transfer the slow feed to prevent the impact work piece, when the cutting circle is big may the magnetic sw

knife shaft before arm cylinders central magnetic switch controls the solenoid valve, used to control feed to the workpiece 2 - 3 cm cylinder conversion when slow feed prevent shock when cutting a round a larger workpiece, when magnetic switch to cylinder head can be adjusted, when compared with 330

Tool axis swing arm magnetic switch control of the Central cylinder, solenoid valve, used to control entry to 2-3 cm from the workpiece cylinder into a slow approach to prevent shocks when the workpiece, when cutting large magnetic switch to the cylinder head can be adjusted, more hours when cutting