青云翻译

Stirrups in the overlay at the hook, in the beam to cross banding, stirrup hooks to 135 °, straight part of the length of 10d. Beam stirrups should be set the first column at a distance of 50mm at the edge node, the beam-column junction stirrups should be encrypted, the encryption zone spacing and l

Hoop hook at the superimposed, beam cross binding, hoop hook-135 °, straight part length of 10d. Ends the first Stirrup should be set at a distance of edge column node 50mm, junction of beam and column Stirrup should be encrypted, the same spacing as encrypted district to meet design requirements.

The stirrup is folding gathers place the curved hook, interlocks in Liang Zhongyao binds, the stirrup curved hook for 135°, the straight partial lengths is 10d.Liang Duan the first stirrup should establish is being away from column node edge 50mm place, Liang Duan and the column interface point stir

binder overlapping in the bend of the hook, Mr LEUNG to be staggered tied, binder hook bend is 135 degrees, for 10 straight length part D. Mr Leung is the first binder Martin nodes should be set at a distance 50 mm from the edge, Mr Leung port and Martin interfaces should be encrypted, spaced binder

Hoop hook at the superimposed, beam cross binding, hoop hook-135 °, straight part length of 10d. Ends the first Stirrup should be set at a distance of edge column node 50mm, junction of beam and column Stirrup should be encrypted, the same spacing as encrypted district to meet design requirements.