青云翻译

一个关于大会的事情是有点不清楚。所附的照片显示了，我以为应该适合控制面板背面板。但它不能安装，该板块只有两个螺丝孔（在控制面板上有4个螺丝孔）。同时，溜槽转动电缆应通过板，但目前还没有这个洞。问题：这是该模型的正确盖板？如果是，请发送照片，显示它安装可以看出，正确的方法。

One thing about assembly is a bit unclear. The enclosed photo shows a plate that I assume should fit to the back of control panel. But it cannot be fitted there, the plate has only two screw holes (there are 4 screw holes in the control panel). Also, the chute turning cable should go thru that plate

One thing about assembly is a bit unclear. The enclosed photo shows a plate that I assume should fit to the back of control panel. But it cannot be fitted there, the plate has only two screw holes (there are 4 screw holes in the control panel). Also, the chute turning cable should go thru that plate

thing about One assembly is a bit unclear, The enclosed photo shows a plate I assume that should fit to the back of Control panel, it cannot be fitted But there, and the plate only has two screw holes (there are 4 screw holes in the control panel) to the chute, turning Also cable should go thru that

One thing about assembly is a bit unclear. The enclosed photo shows a plate that I assume should fit to the back of control panel. But it cannot be fitted there, the plate has only two screw holes (there are 4 screw holes in the control panel). Also, the chute turning cable should go thru that plate